DCS INFRASTRUCTURE, LLC

Description

TAS::36 0158::TAS RECOVERY ACT, PROJECT 620A4-09-117, REPLACE STEAM TRAPS AT CASTLE POINT, A/E A) PROVIDE ALL NECESSARY LABOR AND MATERIAL TO PREPARE CONSTRUCTION DOCUMENTS TO REMOVE AND REPLACE ALL EXISTING STEAM TRAPS IN THE PENTHOUSE, LAB PENTHOUSE OF BUILDING 15. B) PROVIDE ALL NECESSARY LABOR AND MATERIAL TO REMOVE AND REPLACE ALL EXISTING STEAM TRAPS AND CONDENSATE PUMPS IN THE BASEMENT OF BUILDING #15E. C) PROVIDE ALL NECESSARY LABOR AND MATERIAL TO PREPARE CONSTRUCTION DOCUMENTS TO REMOVE AND REPLACE ALL EXISTING STEAM TRAPS AND CONDENSATE PUMP ON THE BASEMENT FLOOR OF BUILDING #15H. D) PROVIDE ALL NECESSARY LABOR AND MATERIAL TO PREPARE CONSTRUCTION DOCUMENTS TO REMOVE AND REPLACE ALL EXISTING STEAM TRAPS IN THE 1ST FLOOR OF BUILDING #15H. E) PROVIDE ALL NECESSARY LABOR AND MATERIAL TO PREPARE CONSTRUCTION DOCUMENTS TO REMOVE TO AND REPLACE ALL THE EXISTING STEAM TRAPS AND CONDENSATE PUMP IN THE BASEMENT AND PENTHOUSE OF BUILDING #16. F) PROVIDE ALL NECESSARY LABOR AND MATERIAL TO PREPARE CONSTRUCTION DOCUMENTS FOR RELOCATION OF AN UNDERGROUND PORTION OF THE CONDENSATES PIPES AND ALL ASSOCIATED WORK IN CORRIDOR OF BUILDING 16. G) PROVIDE ALL NECESSARY LABOR AND MATERIAL TO DESIGN THE STEAM TRAP MONITORING SYSTEM. ALL NEW STEAM TRAPS SHALL BE CONNECTED TO THE STEAM TRAP MONITORING SYSTEM. H) ALL DESIGNS SHALL BE COMPLETED IN ACCORDANCE WITH THE VA DESIGN CRITERIA AND ALL APPLICABLE NFPA, NEC AND ASHRAE CODES AND STANDARDS. I) INCLUSIVE OF FIVE (5) ADDITIONAL SITE VISITS AT $1,086.40 PER VISIT.

Base award description: TAS::36 0158 000::TAS RECOVERY ACT, PROJECT 620A4-09-117, REPLACE STEAM TRAPS AT CASTLE POINT, A/E THE AE DESIGN FIRM IS TO PROVIDE A/E SERVICES TO EVALUATE AND DESIGN OF THE STEAM TRAP REPLACEMENT AND REMOTE MONITORING EQUIPMENT IMPROVEMENTS FOR THE STEAM SYSTEMS AND RETURN LINES AT THE CASTLE POINT CAMPUS. WORK INCLUDES, BUT IS NOT LIMITED TO THE FOLLOWING: A/E TO PERFORM DESIGN SERVICES: 1. FIELD SURVEY OF ALL BUILDINGS TO LOCATE, IDENTIFY, RECORD CONDITION AND DEFIENTECIES, SIZING, CAPACITY, ETC. AND DEVELOPMENT OF A PLAN OF THE (STEAM SUPPLY AND CONDENSATE RETURN) SYSTEMS. PERFORM THE COMPUTATION OF BUILDING LOADS, CURRENT CONSUMPTION USAGES, COMPUTATION AND ANALYSIS OF SUPPLY AND RETURN PIPE SIZES AND RETURN PUMP SIZE. THE DESIGN TO EXISTING SYSTEMS TO LOCATE AND REPLACE, RELOCATE AND INSTALL, AND CALCULATE SIZING, CAPACITIES OF NEW STEAM TRAPS. 2. DESIGN OF RENOVATIONS TO THE MECHANICAL ROOMS, INCLUDING: NECESSARY ROOM CONFIGURATION AND RE-CONSTRUCTION OF PIPING AND EQUIPMENT SUPPORT PADS, VENTILATION AS NEEDED, 3. DESIGN OF RETURN (CONDENSATE) LINE IMPROVEMENTS AND CONDENSATE PUMPING SYSTEMS. 4. IMPLEMENT NEW TRAP MONITORING SYSTEM INTO SYSTEM DESIGN FOR REMOTE MONITORING. 5. DESIGN FOR ABANDONMENT AND REMOVAL OF STEAM SUPPLY AND RETURN LINES INCLUDING ASBESTOS ABATEMENT. 6. A/E SHALL PERFORM SURVEYS OF MECHANICAL ROOMS, INTERNAL VIDEO INSPECTION OF TUNNELS, SITE VISITS AND PREPARE LOGS OF FINDINGS. 7. PROCURE AND COORDINATE INCLUSION OF ASBESTOS AND LEAD SURVEY AND DESIGN FOR ABATEMENT INCLUDING DOMESTIC WATER PIPING WITHIN TUNNEL, BASEMENT AND CRAWLSPACE AREAS TO PROVIDE ABATED AREAS FOR SUBSEQUENT CONSTRUCTION ACTIVITIES. 8. DESIGN FOR TEMPORARY RE-INSULATION OF PIPING IN ABATED AREAS UNTIL SUBSEQUENT CONSTRUCTION ACTIVITIES.